The Furniture Industry Research Association

The centre of knowledge for the furniture industry

The Furniture Retail Quality Group best practice guide - flammability testing

At a glance:

This guide draws upon experience gained by retailers, test organisations when conducting ignition tests for the industry and other interested parties. The guide aims to provide advice to manufacturers and suppliers of upholstery and components, and to help identify the requirements for different upholstery components in a simple and straight forward manner, and to provide advice to test laboratories, and to identify and document ‘best practice rules’ for ignition test procedures relating to the testing requirements of the UK furniture regulations in order to reduce any uncertainties and enhance reproducibility.


Highlights:

  • Basic requirements of the Regulations
  • Details of the Schedules
  • Labelling requirements
  • Best practice test methods
  • Reporting
  • Best practice matrix – flammability testing recommendations

The Furniture and Furnishings (Fire) (Safety) Regulations 1988, amended 1989, 1993 and 2010, have been implemented in the UK for over 20 years. The Regulations contain requirements for the ignition resistance of upholstery components.

The procedures for assessing the ignition resistance of upholstery components, required by the regulations, are contained in a series of Schedules. These Schedules call up various British Standard test methods which detail the methods by which testing to prove compliance with the regulations is to be conducted. The methods contained within the cited British Standards are further modified by the wording within these Schedules.

The test requirements for different upholstery components can be difficult to understand without considerable experience. Overall the specified test procedures are reasonably clear on how the testing should be performed. However a small number of uncertainties exist, pertaining to the testing and the regulatory requirements, which cause concern to the industry especially where reproducibility between testing laboratories is concerned.

This best practice guide draws upon experience gained by retailers, test organisations when conducting ignition tests for the industry and other interested parties, since the introduction of the regulations over twenty years ago, in order to demonstrate compliance with the Furniture and Furnishing (Fire) (Safety) Regulations and simply aims to identify and document a series of ‘best practice rules’ for upholstery suppliers and laboratories worldwide to reduce any uncertainties and enhance reproducibility.

View guide

You may be interested in
entries related to...

Research Association,
Furniture Retail Quality Group,
Testing,
Flammability
97 Entries

  • Implications of providing office/contract chairs for employees who are working at home

    Implications of providing office/contract chairs for employees who are working at home

    News July 2020

    Clarification from OPSS: do office chairs in the home need to comply with the FFFSR if they've been tested to BS 7176: 2...

  • Furniture Fire Safety​

    Furniture Fire Safety​

    News November 2019

    Key point: upholstered furniture has a significant impact on domestic house fires

  • FIRA International continues expansion programme

    FIRA International continues expansion programme

    News June 2019

    Members receive preferential rates on FIRA International testing

  • ‘Statistics Digest for the UK Furniture Industry’

    ‘Statistics Digest for the UK Furniture Industry’

    News February 2019

    £17.5 billion consumer spend on furniture and furnishings

  • ‘Electrical accessories incorporated into furniture - a guide to the UK regulations’

    ‘Electrical accessories incorporated into furniture - a guide to the UK regulations’

    News February 2019

    Third guide concerning electrical components in furniture

  • New standard for office furniture published

    New standard for office furniture published

    News February 2019

    ANSI-BIFMA X5.9: 2019 Storage units

  • EU Exit Business Readiness Forum 31st January 2019

    EU Exit Business Readiness Forum 31st January 2019

    News February 2019

    The forum is likely to be hosted on a weekly basis until March 2019

  • UKAS accredited flammability testing

    UKAS accredited flammability testing

    News February 2019

    Our service provider, FIRA International, has expanded their facilities

  • California TB 133 Flammability Test Procedure for Seating Furniture for Use in Public Occupancies

    California TB 133 Flammability Test Procedure for Seating Furniture for Use in Public Occupancies

    News January 2019

    California TB 133 has been repealed effective January 22

  • Interim policy for mattresses and mattress pads

    Interim policy for mattresses and mattress pads

    News January 2019

    Policy for mattresses subject to 16 CFR part 1632

  • Government White Paper on Immigration

    Government White Paper on Immigration

    News January 2019

    Single immigration system, ending free movement

  • Final standards update for 2018

    Final standards update for 2018

    News December 2018

    Details of new standards and updates to others

  • Furniture Industry Research Association summarise final quarter activity

    Furniture Industry Research Association summarise final quarter activity

    News December 2018

    Standards, new guidance, Brexit and more.

  • REACH EU exit guidance

    REACH EU exit guidance

    News December 2018

    Seven different scenarios are covered.

  • Office and contract furniture technical forum update

    Office and contract furniture technical forum update

    News December 2018

    Resources are now available to members.

  • Biomass Subsidies and their impact on the British Furniture Industry

    Biomass Subsidies and their impact on the British Furniture Industry

    Knowledge Hub

    This report focuses on the Renewables Obligation woody biomass subsidy and the detrimental effect it is having on Britis...

  • About membership

    About membership

    Benefits of membership and how we support the industry

  • Competitiveness of the UK furniture manufacturing industry

    Competitiveness of the UK furniture manufacturing industry

    Knowledge Hub
  • Current and alternative flame retardants for upholstered furniture

    Current and alternative flame retardants for upholstered furniture

    Knowledge Hub

    The use of flame retardants in furniture and furnishings is of great significance, especially in the UK, where fire safe...

  • Electrical accessories incorporated into furniture - a guide to the UK Regulations

    Electrical accessories incorporated into furniture - a guide to the UK Regulations

    Knowledge Hub

    For designers and manufacturers of furniture with electrical features, covering applicable EU Directives and CE marking ...

  • Electrically actuated furniture for the domestic market - a guide to the UK Regulations

    Electrically actuated furniture for the domestic market - a guide to the UK Regulations

    Knowledge Hub

    Guide to the Application of the Machinery Directive 2006/42/EC, Edition 2.1 in relation to domestic furniture

  • The Furniture Industry Research Association Council

    Furniture Industry Research Association

  • Electrically powered office furniture -  a guide to the UK Regulations

    Electrically powered office furniture - a guide to the UK Regulations

    Knowledge Hub

    The 62 page guide identifies the relationship with powered office furniture products such as sit / stand desking and oth...

  • Fire safety of furniture and furnishings in the contract and non-domestic sectors - a guide to the UK requirements

    Fire safety of furniture and furnishings in the contract and non-domestic sectors - a guide to the U...

    Knowledge Hub

    The fire safety of upholstered furniture supplied into the non-domestic market is more complex. It is heavily influenced...

  • Fire safety of furniture and furnishings in the home - A Guide to the UK Regulations

    Fire safety of furniture and furnishings in the home - A Guide to the UK Regulations

    Knowledge Hub

    Any filling material, whether foam or non-foam, intended for use in furniture, must meet specified ignition tests. This ...

  • Guide to Health and safety management for the woodworking and furniture industries

    Guide to Health and safety management for the woodworking and furniture industries

    Knowledge Hub

    Fulfilling the legal requirements, implementing processes and maintaining documented systems

  • Improving UK Productivity and Industry 4.0

    Improving UK Productivity and Industry 4.0

    Knowledge Hub

    Details the potential for Industry 4.0 to improve productivity

  • Mind The Gap -  Skills and Training in the Furniture Industry

    Mind The Gap - Skills and Training in the Furniture Industry

    Knowledge Hub

    This report aims to fuel the development of industry wide initiatives to ensure that the skills agenda is fully addresse...

  • National Furniture Specifications - A Guide for Specifiers

    National Furniture Specifications - A Guide for Specifiers

    Knowledge Hub

    Guide to assist specifiers in the tender process when acquiring contract or domestic furniture and a guide for manufactu...

  • Product Selection for the furniture supply chain

    Product Selection for the furniture supply chain

    Knowledge Hub

    How to manage the product selection process from initial brief to placing your product on the market, working with your ...

  • ​Report on 'Real-life' UK kitchen study findings

    ​Report on 'Real-life' UK kitchen study findings

    Knowledge Hub

    Three year study into the way UK consumers use kitchens

  • Sustainability Hotspot Analysis for the Furniture Industry

    Sustainability Hotspot Analysis for the Furniture Industry

    Knowledge Hub

    The Furniture Industry Research Association presents the wide ranging aspects of a sustainability hotspot analysis by re...

  • The potential impact of flame retardants on the 'end of life' of upholstered furniture and furnishings

    The potential impact of flame retardants on the 'end of life' of upholstered furniture and furnishin...

    Knowledge Hub

    This report investigates the impact of the presence of flame retardants on the furniture industry in relation to the dis...

  • Biomass Subsidies and their impact on the British Furniture Industry

    Biomass Subsidies and their impact on the British Furniture Industry

    Knowledge Hub

    This report focuses on the Renewables Obligation woody biomass subsidy and the detrimental effect it is having on Britis...

  • FIRA Standards

    FIRA Standards

    Knowledge Hub
  • Furniture Retail Quality Group - Industry Standard Children’s Domestic Furniture - General safety requirements

    Furniture Retail Quality Group - Industry Standard Children’s Domestic Furniture - General safety re...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group - Industry Standard  Furniture - Children’s Domestic Furniture – Seating – Requirements for strength, stability and durability

    Furniture Retail Quality Group - Industry Standard Furniture - Children’s Domestic Furniture – Seat...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group Industry Standard Furniture - Children’s Domestic Furniture - Tables and desks – Requirements for strength, stability and durability

    Furniture Retail Quality Group Industry Standard Furniture - Children’s Domestic Furniture - Tables ...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group - Industry Standard    Furniture - Children’s Domestic Furniture – Storage furniture – Requirements for strength, stability and durability

    Furniture Retail Quality Group - Industry Standard Furniture - Children’s Domestic Furniture – St...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • The Furniture Retail Quality Group Best Practice Guide 2017 - Glass in Furniture

    The Furniture Retail Quality Group Best Practice Guide 2017 - Glass in Furniture

    Knowledge Hub

    The guide has been developed in conjunction with the Furniture Retail Quality Group, whose members include technologists...

  • Testing services

    Testing services

    Use our comprehensive testing services to evaluate the safety, durability, and structural adequacy of your product

  • Product testing videos

    Product testing videos

    See videos showing some of the tests our experts carry out to ensure products are fit-for-purpose

  • Overview of our product testing services

    Overview of our product testing services

    FIRA International product testing services video, furniture and related products

  • Adhesive testing

    Adhesive testing

    See how furniture experts test adhesives

  • Cot testing

    Cot testing

    How our experts test the durability of cots

  • Drawer testing

    Drawer testing

    Furniture experts test for strength, durability and stability of drawers

  • Cabinet door testing

    Cabinet door testing

    How our experts test furniture cabinet doors for durability

  • Sliding door tests for durability

    Sliding door tests for durability

    see how our experts test all types of doors on furniture for durability - cabinets, sideboards, wardrobes, occasional fu...

  • Testing height adjustable desks

    Testing height adjustable desks

    See how our experts test adjustable desk for stability and strength

  • How we test tables

    How we test tables

    See how our experts carry out performance tests on tables

  • Testing of domestic and non-domestic seating

    Testing of domestic and non-domestic seating

    Our experts can test domestic and non-domestic chairs for strength and stability

  • Bench testing

    Bench testing

    Here's an example of how our experts test a bench for strength and stability

  • Furniture arm testing

    Furniture arm testing

    Video showing experts testing for strength, durability and safety of furniture arms

  • How we test motorised recliners

    How we test motorised recliners

    See how our experts test motorised recliners

  • Office chair testing

    Office chair testing

    See how our experts test the swivel mechanism on office chairs

  • Sofa Testing

    Sofa Testing

    See how the experts test sofa's

  • Flammability testing

    Flammability testing

    Video of furniture flammability test, comparison of pass and fail, regulations, fabrics and foam

  • Testing colour fastness to light

    Testing colour fastness to light

    Our experts can test fabric for colour fastness to light

  • Fabric colour fastness tests

    Fabric colour fastness tests

    See how our experts gauge how liable fabrics are to colour fastness when rubbed.

  • Foam testing

    Foam testing

    See how our experts test foam used in upholstered furniture for for durability

  • Ottoman bed testing

    Ottoman bed testing

    See how our experts set up an ottoman bed for testing to assess performance over a set number of cycles

  • How mattresses are tested

    How mattresses are tested

    See our mattress roller in action. This test gives and indication of how mattresses will perform over years of use

  • Seating - American standards testing

    Seating - American standards testing

    Safety and performance testing to various ANSI and BIFMA American standards

  • Balustrade testing

    Balustrade testing

    Ensuring they meet domestic or commercial regulations

  • ​Childcare product classification

    ​Childcare product classification

    Knowledge Hub

    Identifying the difference between a toy and an item of furniture correctly, as the standards and test methods applicabl...

  • Beds and mattresses

    Beds and mattresses

    Beds, mattresses and components (springs, toppers, foams)

  • Improved Performance for Businesses Implementing ISO 14001:2015

    Improved Performance for Businesses Implementing ISO 14001:2015

    Knowledge Hub

    This article is a simple, beginners guide to performance measurement.

  • Chairs and seating

    Chairs and seating

    Strength and stability testing of all types of seating, to ensure fitness for purpose

  • Leather types, characteristics and maintenance

    Leather types, characteristics and maintenance

    Knowledge Hub

    Leather types and characteristics, the benefits of testing and care and maintenance of leather upholstery

  • Children’s furniture testing

    Children’s furniture testing

    We can test a wide range of childcare product including pushchairs, high chairs, changing units, cots and beds

  • ​Specifying leather for furniture

    ​Specifying leather for furniture

    Knowledge Hub

    Identifying which standards and properties are relevant to leather performance

  • Flammability testing

    Flammability testing

    UKAS accredited flammability testing on all types of upholstery, fabrics, foams, feathers and fillings

  • Standards applicable to the sale of childcare (furniture) products in the UK

    Standards applicable to the sale of childcare (furniture) products in the UK

    Knowledge Hub

    A summary of some of the products and standards relating to the manufacture, specification and sale of furniture and rel...

  • Foam

    Foam

    We undertake performance and flammability testing on foams for domestic to heavy contract use

  • Cable Management Systems– Understanding BS 6396

    Cable Management Systems– Understanding BS 6396

    Knowledge Hub

    To ensure the safety of the user, all cable management systems should conform to BS 6396:2008+A1:2015 – Electrical syste...

  • UV Pine lacquer free colouration

    UV Pine lacquer free colouration

    Knowledge Hub

    Adding colour to pine the natural way

  • Storage furniture

    Storage furniture

    Our experts can test all types of storage furniture and components for safety, strength and durability

  • What do I need to know to sell highchairs in the UK?

    What do I need to know to sell highchairs in the UK?

    Knowledge Hub

    Summary of highchair testing and specification requirements taking account of the current standards and possible introdu...

  • Surface finish

    Surface finish

    Our UKAS-accredited lab can test surface durability against factors such as abrasion, impact, heat and chemicals

  • Tables and desks

    Tables and desks

    We test tables (including glass) and desks for safety, stability, strength and durability

  • Textiles

    Textiles

    Our experts can test fabrics properties such as physical strength, colour fastness, pile retention and wear resistance

  • Wood based materials

    Wood based materials

    We test raw materials used in the manufacture of furniture, with specific expertise in wood based products

  • Test equipment

    Test equipment

    Need some in-house test equipment? Our experts can design and build equipment to your specification

  • Remanufacturing for the Circular Economy

    Remanufacturing for the Circular Economy

    Knowledge Hub

    Report summarising the finding of a project which compares the potential of remanufactured furniture versus brand new pr...

  • Study into the Feasability of Benchmarking Carbon Footprints of Furniture Products 2011

    Study into the Feasability of Benchmarking Carbon Footprints of Furniture Products 2011

    Knowledge Hub
  • Statistical Digest for the Furniture Industry 2018

    Statistical Digest for the Furniture Industry 2018

    Knowledge Hub

    This Digest reveals continued growth in demand for furniture and furnishings with consumer expenditure at £17.5 billion.

  • Statistical Digest for the Furniture Industry 2017

    Statistical Digest for the Furniture Industry 2017

    Knowledge Hub

    Furniture industry statistics, including facts, figures and commentary covering furniture production and international t...

  • Statistical Digest for the Furniture Industry 2016

    Statistical Digest for the Furniture Industry 2016

    Knowledge Hub

    Furniture industry statistics, including facts, figures and commentary covering furniture production and international t...

  • Statistical Digest for the Furniture Industry 2019

    Statistical Digest for the Furniture Industry 2019

    Knowledge Hub

    In-depth analysis of the latest data sourced from Government bodies

  • BFC Manifesto for the Furniture Industry 2017

    BFC Manifesto for the Furniture Industry 2017

    Knowledge Hub

    The BFC Manifesto has been developed in response to an industry-wide survey it conducted soon after the EU referendum wa...

  • BFC Proposal for updating UK Flammability Regulations - June 2017

    BFC Proposal for updating UK Flammability Regulations - June 2017

    Knowledge Hub

    Summary of the British Furniture Confederation’s Proposed Revision of Furniture & Furnishings (Fire) (Safety) Regula...

  • Implications of providing office/contract chairs for employees who are working at home

    Implications of providing office/contract chairs for employees who are working at home

    Knowledge Hub
  • Cabinets

    Cabinets

    Choose cabinet furniture that's right for you

  • Kitchen buying guide

    Kitchen buying guide

    What to consider for kitchen purchases

  • Mattress buying guide

    Mattress buying guide

    What will be the best mattress for you?

  • Outdoor furniture

    Outdoor furniture

    Options and advice on aftercare

  • Upholstery buying guide

    Upholstery buying guide

    Foams, fillings, fabrics and more