The Furniture Industry Research Association

The centre of knowledge for the furniture industry

Download PDF

Knowledge Hub Article

Published on 22nd October, 2015
by Technical Services

What is cable management?

Highlights:



Cable management refers to the provision of distribution systems for electrical power, data and communications cabling in office desking and screens. This includes cable trays, power sockets etc used for computers, computer networks and telephones

Introduction

Cable management refers to the provision of distribution systems for electrical power, data and communications cabling in office desking and screens. This includes cable trays, power sockets etc used for computers, computer networks and telephones.

To ensure the safety of the user, all cable management systems should conform to BS 6396: 2008 – Electrical systems in office furniture and Educational Furniture – Specification.

What are the key requirements of BS 6396?

Full requirements are available within the standard, however as a short summary:

  • All furniture must be fit for purpose, this is normally proved by testing to current strength and stability standards. (see article entitled What do I need to know to sell office desking in the UK?)
  • There should be no sharp edges on any of the equipment or furniture in contact with any cabling to prevent damage in use.
  • All components should conform to the British Standards relevant to those products.
  • All parts of the electrical distribution system should be prevented from overcurrent and the user should never be exposed to hazardous voltages, even if there is a failure of insulation.
  • Any mains power cable entering the desk should be less than 2 m in length and should feature a cable clamp at the inlet to the desk to prevent undue strain on the cable.
  • The maximum rating of the electrical distribution system should be no more than 13 amps, and the number of sockets used is limited to four (if rated no more than 5A each) or six (if rated no more than 3.15A each).
  • The power sockets also need to placed to protect them from water spillage such as knocking over a cup of coffee.
  • Power cabling needs to be segregated from data cables. This is achieved either by having a 50mm gap between power and data cables, dedicated separate channels for power and data cables, cable screening of individual services or insulating all cables for the highest voltage present in the system.
  • Once the system is installed in an office the installation also needs to be checked for continuity, polarity and insulation resistance.

What are the marking requirements?

In addition to the physical requirements the standard also requires that instructions and markings be supplied with the product.

The desk needs a permanent label attached to it detailing the rating of the system and where instructions on safe operation can be found. Full details of the requirements are contained in the standard. It should be noted that the label must be permanent, that is it cannot be removed without destroying it, and the text cannot be removed by rubbing with water or petroleum spirit.

In addition the minimum size of any character must be 2mm. This does not mean a 2mm typeface used by printers, but a typeface where the lower case characters are a minimum of 2mm in height.

Finally adequate instructions for the safe installation and use of the equipment must be supplied as a separate leaflet. Once again the standard contains the minimum details required.

Did you know?

BS 6396 only covers cable management that is ultimately plugged into a standard 13 amp socket. Where power cables are permanently wired into the building ring main they are covered by BS 7671 – the IEE Wiring Regulations.

What are the benefits of testing to this standard?

  • Demonstrates fitness for purpose
  • Shows reasonable steps have been taken to ensure quality and safety
  • Reduction in complaints
  • Provision of expert reports
  • Test certificates can be used for marketing benefits

The requirements for cable management and the benefits of testing

Contact us

You may be interested in
entries related to...

Research Association,
Knowledge
49 Entries

  • Association welcomes new members

    Association welcomes new members

    News October 2019

    New members join the Furniture Industry Research Association

  • Association welcomes new members

    Association welcomes new members

    News August 2019

    15 New members join the Furniture Industry Research Association.

  • ‘Statistics Digest for the UK Furniture Industry’

    ‘Statistics Digest for the UK Furniture Industry’

    News February 2019

    £17.5 billion consumer spend on furniture and furnishings

  • ‘Electrical accessories incorporated into furniture - a guide to the UK regulations’

    ‘Electrical accessories incorporated into furniture - a guide to the UK regulations’

    News February 2019

    Third guide concerning electrical components in furniture

  • EU Exit Business Readiness Forum 31st January 2019

    EU Exit Business Readiness Forum 31st January 2019

    News February 2019

    The forum is likely to be hosted on a weekly basis until March 2019

  • Interim policy for mattresses and mattress pads

    Interim policy for mattresses and mattress pads

    News January 2019

    Policy for mattresses subject to 16 CFR part 1632

  • Government White Paper on Immigration

    Government White Paper on Immigration

    News January 2019

    Single immigration system, ending free movement

  • Final standards update for 2018

    Final standards update for 2018

    News December 2018

    Details of new standards and updates to others

  • Furniture Industry Research Association summarise final quarter activity

    Furniture Industry Research Association summarise final quarter activity

    News December 2018

    Standards, new guidance, Brexit and more.

  • REACH EU exit guidance

    REACH EU exit guidance

    News December 2018

    Seven different scenarios are covered.

  • Office and contract furniture technical forum update

    Office and contract furniture technical forum update

    News December 2018

    Resources are now available to members.

  • Biomass Subsidies and their impact on the British Furniture Industry

    Biomass Subsidies and their impact on the British Furniture Industry

    Knowledge Hub

    This report focuses on the Renewables Obligation woody biomass subsidy and the detrimental effect it is having on Britis...

  • Membership

    Membership

    Benefits of membership and how we support the industry

  • Become a member

    Become a member

    Join hundreds of organisations who rely on us for knowledge

  • Competitiveness of the UK furniture manufacturing industry

    Competitiveness of the UK furniture manufacturing industry

    Knowledge Hub
  • Current and alternative flame retardants for upholstered furniture

    Current and alternative flame retardants for upholstered furniture

    Knowledge Hub

    The use of flame retardants in furniture and furnishings is of great significance, especially in the UK, where fire safe...

  • The Furniture Industry Research Association Council

    Furniture Industry Research Association

  • Fire safety of furniture and furnishings in the home - A Guide to the UK Regulations

    Fire safety of furniture and furnishings in the home - A Guide to the UK Regulations

    Knowledge Hub

    Any filling material, whether foam or non-foam, intended for use in furniture, must meet specified ignition tests. This ...

  • Mind The Gap -  Skills and Training in the Furniture Industry

    Mind The Gap - Skills and Training in the Furniture Industry

    Knowledge Hub

    This report aims to fuel the development of industry wide initiatives to ensure that the skills agenda is fully addresse...

  • National Furniture Specifications - A Guide for Specifiers

    National Furniture Specifications - A Guide for Specifiers

    Knowledge Hub

    Guide to assist specifiers in the tender process when acquiring contract or domestic furniture and a guide for manufactu...

  • Product Selection for the furniture supply chain

    Product Selection for the furniture supply chain

    Knowledge Hub

    How to manage the product selection process from initial brief to placing your product on the market, working with your ...

  • ​Report on 'Real-life' UK kitchen study findings

    ​Report on 'Real-life' UK kitchen study findings

    Knowledge Hub

    Three year study into the way UK consumers use kitchens

  • Sustainability Hotspot Analysis for the Furniture Industry

    Sustainability Hotspot Analysis for the Furniture Industry

    Knowledge Hub

    The Furniture Industry Research Association presents the wide ranging aspects of a sustainability hotspot analysis by re...

  • The Furniture Retail Quality Group best practice guide - flammability testing

    The Furniture Retail Quality Group best practice guide - flammability testing

    Knowledge Hub

    Advice for upholstery component manufacturers and suppliers to help identify the requirements for different upholstery c...

  • The potential impact of flame retardants on the 'end of life' of upholstered furniture and furnishings

    The potential impact of flame retardants on the 'end of life' of upholstered furniture and furnishin...

    Knowledge Hub

    This report investigates the impact of the presence of flame retardants on the furniture industry in relation to the dis...

  • Furniture Retail Quality Group - Industry Standard Children’s Domestic Furniture - General safety requirements

    Furniture Retail Quality Group - Industry Standard Children’s Domestic Furniture - General safety re...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group - Industry Standard  Furniture - Children’s Domestic Furniture – Seating – Requirements for strength, stability and durability

    Furniture Retail Quality Group - Industry Standard Furniture - Children’s Domestic Furniture – Seat...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group Industry Standard Furniture - Children’s Domestic Furniture - Tables and desks – Requirements for strength, stability and durability

    Furniture Retail Quality Group Industry Standard Furniture - Children’s Domestic Furniture - Tables ...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • Furniture Retail Quality Group - Industry Standard    Furniture - Children’s Domestic Furniture – Storage furniture – Requirements for strength, stability and durability

    Furniture Retail Quality Group - Industry Standard Furniture - Children’s Domestic Furniture – St...

    Knowledge Hub

    FIRA Standard created due to the absence of any British or European Standards applicable to children’s domestic and camp...

  • The Furniture Retail Quality Group Best Practice Guide 2017 - Glass in Furniture

    The Furniture Retail Quality Group Best Practice Guide 2017 - Glass in Furniture

    Knowledge Hub

    The guide has been developed in conjunction with the Furniture Retail Quality Group, whose members include technologists...

  • Adhesives for Furniture

    Adhesives for Furniture

    Knowledge Hub

    A look as the types of adhesives used in the furniture industry and their uses

  • Improved Performance for Businesses Implementing ISO 14001:2015

    Improved Performance for Businesses Implementing ISO 14001:2015

    Knowledge Hub

    This article is a simple, beginners guide to performance measurement.

  • Leather types, characteristics and maintenance

    Leather types, characteristics and maintenance

    Knowledge Hub

    Leather types and characteristics, the benefits of testing and care and maintenance of leather upholstery

  • ​Moisture Content of Timber - Production & Storage

    ​Moisture Content of Timber - Production & Storage

    Knowledge Hub

    This article give guidance in this respect for wood based materials intended for use within UK interior environments.

  • ​Specifying leather for furniture

    ​Specifying leather for furniture

    Knowledge Hub

    Identifying which standards and properties are relevant to leather performance

  • UV Pine lacquer free colouration

    UV Pine lacquer free colouration

    Knowledge Hub

    Adding colour to pine the natural way

  • ​Water damage to kitchen worktops

    ​Water damage to kitchen worktops

    Knowledge Hub

    Why worktops need to be fitted correctly

  • Remanufacturing for the Circular Economy

    Remanufacturing for the Circular Economy

    Knowledge Hub

    Report summarising the finding of a project which compares the potential of remanufactured furniture versus brand new pr...

  • A Guide to the Environmental Legislation for Weeds and Non Native Species

    A Guide to the Environmental Legislation for Weeds and Non Native Species

    Knowledge Hub

    Simplified guide to the Regulations that govern the identification and management of weeds and non-native flora species ...

  • Study into the Feasability of Benchmarking Carbon Footprints of Furniture Products 2011

    Study into the Feasability of Benchmarking Carbon Footprints of Furniture Products 2011

    Knowledge Hub
  • Statistical Digest for the Furniture Industry 2018

    Statistical Digest for the Furniture Industry 2018

    Knowledge Hub

    This Digest reveals continued growth in demand for furniture and furnishings with consumer expenditure at £17.5 billion.

  • Statistical Digest for the Furniture Industry 2017

    Statistical Digest for the Furniture Industry 2017

    Knowledge Hub

    Furniture industry statistics, including facts, figures and commentary covering furniture production and international t...

  • Statistical Digest for the Furniture Industry 2016

    Statistical Digest for the Furniture Industry 2016

    Knowledge Hub

    Furniture industry statistics, including facts, figures and commentary covering furniture production and international t...

  • BFC Manifesto for the Furniture Industry 2017

    BFC Manifesto for the Furniture Industry 2017

    Knowledge Hub

    The BFC Manifesto has been developed in response to an industry-wide survey it conducted soon after the EU referendum wa...

  • Cabinet furniture buying guide

    Cabinet furniture buying guide

    Consumer guide that can help you choose cabinet furniture that is right for you.

  • Kitchen buying guide

    Kitchen buying guide

    Kitchen furniture buying guide that can help you purchase a kitchen which is right for you

  • Mattress buying guide

    Mattress buying guide

    Mattress buying guide that can help you buy a mattress that is right for you.

  • Outdoor furniture buying guide

    Outdoor furniture buying guide

    Garden furniture buying guide to help explain the differences between different types of outdoor furniture, as well as h...

  • Upholstery buying guide

    Upholstery buying guide

    Upholstery buying guide that can help you buy the sofa that is right for you.